Receiver/Converter

Measures the time required for the flow meter rotor to rotate, based on the pulse signal proportional to the flow rate, and then calculates the flow rate and outputs it as an analog signal.

Performs the frequency integration of the pulse input signal proportional to the flow rate and outputs it as an analog signal suitable for each type of measuring instrument.

Receives the pulse signal from a flow meter, and then outputs the distributed and frequency-divided pulses.

Receives the unit pulse signal from a flow meter and indicates the integrated value.

流量計からパルス信号を受信し、流量計係数を乗算して積算表示します。

流量計からパルス信号を受信し、流量計係数を乗算して積算表示します。

Receives pulse signals from up to two flow meters, multiplies them by the flow meter factors, indicates the integrated values or flow rates, and outputs the pulse.

親機(PH4,MC75,MC82)からのデータをRS-485通信で受信し、親機と同じ値を大きく表示します。

高輝度LEDと防水ケースの採用により、屋外環境下でバッチカウンタPH4や、ディジタル流量指示積算計MC75,MC82の表示値を大きく表示します。

Performs the I/D or V/D conversion of the analog signal proportional to the flow rate and digitally indicates the instantaneous flow rate.

Performs the cycle calculation of the pulse signal from a flow meter, multiplies the value by the flow meter factor, and digitally indicates the instantaneous flow rate.

Performs the I/F or V/F conversion of the analog signal proportional to the flow rate, and digitally indicates the instantaneous flow rate and the integrated flow rate.

Receiving the pulse signal from flow meter, batch controller, and so on, up to 2 equipment and print out the total value of every batch or every setting interval.

Receiving the pulse signal from flow meter, batch controller, and so on, up to 8 equipment and print out the total value of every batch or every setting interval.

Converts the pulse signal proportional to the flow rate into the analog or digital signal suitable for each type of measuring instrument.